Fishing and wellbore cleaning
Safety Shear Swivel
Control Line Clamp
Flat Bottom Fishing Magnets
X Wing Fishing Magnets
String Magnets - Heavy Duty
String Magnets - Heavy Duty 4X
String Magnets - Coiled Tubing
BOP Cleaning Tool
BOP Cleaning Assembly
Completion Liner Drift & Cleaning Tool
In addition to providing our established high quality products for successful drilling and completion, Innovar Solutions also develops new and exiting ideas to further improve our tool range.
The Innovar 8,3-in OD Magnum Fishing Magnet recovers 75 kg fish on the first run
Utility drilling contractor Norsk Retningsboring AS lost one of the cutters from their 38 1/2" hole-opener, 740 meters in well.
Fishing Success with Magnum Fishing Magnet® in Azerbaijan
A major operator ran a 12,1-in OD Magnum Fishing Magnet® and recovered all lost steel fingers, weighing more than 51 kg, in one run.
Wellbore Cleaning Success in Kurdistan
Ran two 2.750” OD Innomag CT String Magnets® and a 3,300-in OD Magnum Fishing Magnet to remove debris from the top of a mechanical bridge plug to be r...
Fishing Success in Saudi Arabia
Ran a 1.50” OD Magnum X Fishing Magnet® to recover lost dogs (Locking Keys) of a 2.313” Lock Mandrel from a well onshore Saudi Arabia.
Improved Well Log Achieved by Placing Magnet in front of Logging Tool
A Magnetic Drift with brush was run below the logging tool, in order to clean the well for magnetic swarf.
The Innovar Jet Bailer Proves its Capabilities at Statoil Operated Field
The Jet Bailer successfully penetrates packed proppants, making the mobilization of coiled tubing unnecessary for the contractor
Fishing Success at Midtfjellet Vindpark
Used a 8,3" Fishing Magnum Magnet® to recover a lost drill bit at Midtfjellet Vindpark
Clean-Up Magnet Recovers Debris from Perforating Operation
Four 3,5” Modular X Wing® Magnets were installed below the perforating guns, to recover steel debris from perforating the well
Fishing Success in the Landfall Well for the Nordlink Project
Used a 8,3” Fishing Magnum Magnet® to recover 2 rock bit cones in a 12 ¼” hole